Mcs Network Monitoring System

In domestic, uses the optical fiber to receive right of residence(FTTB+LAN) to the building ether the technical wide band network is the present wide band network one mainstream way. In it's operation process, the management which to the wide band network equipment, the correspondence link and the equipment exterior uses is one kind of regularity and the essential work. In outstanding technical and under the standard support, the simple and the practical tool has already become the network management mainstream.This article introduced in the engine room management network management supervisory system. Specially aims at the FTTX+LAN way the wide band network design, are partial including the hardware module and the software module. Based on the receive MCS network management module gathering network data, and according to gathers the data to produce a series of graphs, uses in to monitor the network condition, it not only can provide the network movement present situation analysis, moreover can provide the network performance the historical information. it was allowed to monitor the whole/local network condition, and the coordinate network management system appeared when the breakdown starts the alarm system, the notice technical personnel promptly rushes to the scene to fix the breakdown, this was one of digital data service center management monitor cores.The paper first reviewed the domestic and foreign network management system development and the technology, and carries on the comparison and the analysis to the different plan. Then the paper introduced the independent intellectual property rights MCS supervisory system solution and the overall flow, as well as in this software research and development involve several kind of essential technical analyses. The supervisory system first floor is the upper formation function foundation, its vigorous and convenience to overall system very important, therefore the third chapter of simple introduction supervisory system hardware have been partial, but is not the present paper key point. Fourth chapter introduced the software function realization principle, the Fifth chapter is the software each function module design detailed introduction.This plan after the design, the code and the test, has succeeded in some plot and the engine room scene implementation. After the system whole test, each target basically achieved when design the anticipated target, obtained user's high praise.