Research On Application Software Base On Microwave Radiometric Characteristic Measuring System

According to the research on the basic theory of radiation measuring and the analyzing of the hardware structure of 3mm ground microwave radiometric characteristics measuring system, the theory and the design of the application software base on this radiometric characteristics measuring system is introduced in this thesis, and the detailed design scheme is given.This thesis gives the particular introduction of the research development of domestic and international microwave radiometer, analyzes the research trend of microwave radiometer, and points out the task of this project, which is to design application software for 3mm ground microwave radiometric characteristics measuring system, the software is used in object radiometric characteristics measuring and radiometer imaging system. Discussions of the basic principle and some measuring instances of typical objects are given by the thesis, and some important metrics of microwave radiometer are also analyzed. Software design should be based on an in-depth knowledge of hardware system, so the thesis gives a detailed description of the composing and the core control circuit of the hardware of the microwave radiometric characteristics measuring system, which is the basic of our project. Then the function of this application software in our project is found out, as the direction of the design process of this software. After this, this thesis studies on some of the important principles and schemes in the design process of this two application software, microwave radiometric characteristic measuring system and microwave radiometer imaging system. Some design details and programming implementation are analyzed, too.At the end of this thesis, the author summarizes the experience and the production during the process of this project, and gives some suggestions.