Industry Endoscope System Using In Automobile Services Based On Embedded Linux

The industry endoscope has the widespread using in the automobile service enterprise. But, these industry endoscope has the limitation of costliness or inconvenience in portability, bad in the picture quality, inconvenience in using. Therefore, studing one industry endoscope which Satisfy the request of domestic automobile service enterprise has the extremely realistic significance.This thesis putted forward one kind solution of based on the ARM processorindustry endoscope. In the hardware aspect, selected the advanced chip of ARM ------S3C2410, which highly integrates the internal circuit and the rich periphery interface. It enhanced the system performance, reduced the cost. Used based on the OV511 CMOS image gathering module,it is simple with the hardware platform joint through the USB connection.It not only guaranteed the picture quality, but also reduced the development difficulty.In the software aspect, selected the embedded Linux operating system. It enhanced the system flexibility, reduced the development difficulty.The paper introduced this system performance from two aspects of the hardware and the software.Mainly divided into the following chapters: The first chapter introducted the industry endoscope present situation and embedded Linux; Second chapter introducted the ARM hardware platform and CMOS image gathering module which was designed or selected by us; The third chapter introduced how to establish the development environment and how to debugging; The forth chapter is the realization of goal system application software.