Design And Realization Of Remote Monitoring System For Intelligent Breaker Based On LabVIEW

Remote monitoring and control system for intelligent Breaker is research hotspot, because of particularity of apply occasion, it is very necessary to use remote monitoring for Breaker therefore. The article is that resolving industry monitoring and control problem, have built taking LabVIEW as superordination machine monitor the software platform, and the slave machine is to support CAN and Modbus communication, link up between the host and slave machine by RS-485 bus, have realizing a entire industrial control network thereby.First, based on adequate study for the remote monitoring and control systems and analysis of various construction modes of them, it take the remote monitor and malfunction diagnose as the priority studying. This paper focuses on realizing Modbus protocol on RS-485 bus, and researching serial communication base on LabVIEW software develop platform, under the ADS1.2 software compile environment , have developed the intelligent Breaker that can communication with other equipment with CAN and Modbus protocol. Secondly, after analyzing the requirement of the remote monitoring and control system for intelligent Breaker, this paper puts forward a solution base on LabVIEW. In this paper it describes design and realization of remote monitoring , furthermore it explain detail the design and realizing of entire system. Thirdly, put remote monitoring and control system compose module design principle and realization method base on LabVIEW develop platform, discussed the hardware composed principle of every communication module, there is detailed describe about the remote monitoring and malfunction diagnose on host machine. The hardware and software of each model were given out in this paper, expanding the program process ,software code, and results generated by the program based on LabVIEW software platform in detail. At last, completed debugging and testing of the remote monitor system, and gave out the testing results and analysis at the end of this paper, the results indicate that can real-time monitor and control by this remote monitor system, can inquire about and revise the parameter of intelligent Breaker on the host machine, The success of the system proves the validity of the research and the magnificent future of the monitoring and control system based on LabVIEW.The remote monitor and control system based on vitural instrument was researched and implemented in this subject, the testing result prove that the remote monitoring system can work stably and reliably.