Study Of The Five In One Control Construction Of Water Electricity Station Based On Embedded Technique

Collect related technique information, achieve the new development solutions about Embedded Technique, and acquaint with the basic request of the water electricity station, all of which provide the necessity assurance for the implement of the topic.Based on the control request, combined with related technical development at home and abroad, finish the Five in one control construction's design, including five parts of Tongqi Unit, Lici Unit, Tiaosu Unit Zhukong Unit and Jiankong Unit, design the similar hard environment and the special soft system.Make use of the popular Embedded technique, adopt the standard ARM chip (the S3C4510 of the ARM7 TDMI series), carried outer expand apart (power, clock, reset, RS232 driver, Ethernet driver, Flash, SDRAM, JTAG etc.), set up hardware system.And test the system that makes the system accord the need of water electricity station.Choose the ADT (ARM Developer Tools); finish the software design of the Connection management module (Serial-port, Ethernet), the Flow management module (Order flow control, Tongqi flow control, Lici flow control)Thinking of the whole system's technique characteristics, give the detailed expatiation about the system including the good quality and the demerit.Following the research of this topic, the design could satisfy the quest about the water electricity station control system, which supplies a good method to choose the type and to design the software, also provides an important reference for the design of the actual device.