Home Network WIFI Scene Reconstruction

With the rapid development of wireless technology and the increasing demand for network usage,the WIFI network environment and information transmission scenarios are becoming more and more complex,and therefore have the characteristics of instability and high randomness.As a major application scenario of the wireless WIFI network,the home WIFI network is prone to conflicting interference,signal attenuation and other damage to the transmission process during communication,which will lead to low transmission efficiency,network congestion,packet loss and packet damage.It is precisely because of these potential congestion situations that we need to optimize conflicting home WIFI networks.Since we cannot perform on-site debugging on every home network,if we can restore the on-site deployment through the statistical background of the message without affecting the service transmission,we can reduce the complicated process of on-site debugging and make it more convenient and efficient.However,as the distribution scenarios of wireless networks become more and more complex,it becomes particularly difficult to simulate real and reliable network scenarios.Therefore,before optimizing the wireless network,it is necessary to restore the real network scenario and rebuild a reliable business network.This article is based on the laboratory project "Reconstruction of Home Network WIFI Scene".Based on the research of the existing WIFI protocol in the laboratory,the research and design of the AP side WIFI service and conflict interference scene reconstruction are studied and designed without affecting the premise of router business Next,restore the actual scenario of the home network,and rebuild the service distribution and the actual network efficiently and accurately while occupying less CPU overhead.The reconstruction of the home network WIFI scene is mainly divided into three modules,namely a business statistics module,a conflict detection module and an interference detection module.This article first introduces the overall design of business statistics and conflict interference detection,draws out the key modules of each part,and introduces related key technologies around these key modules.Then,according to the functional requirements of each module,the architecture and specific implementation process of each functional module are given.The business statistics module,the conflict detection module and the interference detection module are implemented respectively.Finally,unit verification is performed on each part of the business statistics and conflict interference detection.