The Design And Implementation Of Terminal For Senile Health Monitoring

With the development of medical care level,the average life expectancy of people is increasing,aging of population is the trend of global population.Elderly people have a higher risk of chronic disease and need a longer recovery time.Due to various reasons,they can't get enough medical service in the hospital.Because of the disease,the health of elderly people is not optimistic and may lead to death.Therefore,it is very necessary to carry out real-time monitoring.This article aims to develop terminals for health monitoring of elderly people,including wearable vital physiological signals monitoring terminal and a distributed foot pressure acquisition terminal.The STM32 was employed as a microcontroller,the ECG acquisition circuit,respiratory wave acquisition circuit,photoelectric sensor temperature acquisition circuit and wireless communication circuit was designed,and finally a portable,simple operation monitoring terminal was developed.A distributed plantar pressure acquisition terminal was then developed using a cross acquisition sensor elements.The distributed plantar pressure data can be obtained by the cooperation of software and hardware,the results were transmitted to the PC for display and analysis through the wireless network.After all of the data collected from PC devices,analysis of multidimensional data fusion,the information will be under the blessing of wireless network technology,and sent to the hospital,prevent serious threat to the life safety.Verify the feasibility and experimental analysis,a terminal under the premise of guarantee the accuracy of the data first,and then to the old man's health and illness rehabilitation assessment of multidimensional analysis,provide data of medical support,and good for the old feeling of no consciousness monitoring service terminal.