Agricultural Bank Jinzhou Branch Energy Comprehensive Data Monitoring And Monitoring System Design

In view of the low energy use efficiency and waste of power in the Jinzhou Branch of the Agricultural Bank of China,this paper proposes a power monitoring and monitoring system using ZigBee wireless communication technology.Compared with the traditional power monitoring and monitoring method,the wireless communication ZigBee technology has low cost.Low power consumption and reliable transmission are widely used in data transmission and industrial control.This paper uses ZigBee wireless communication technology to monitor and monitor the electric energy of the Agricultural Bank of China Jinzhou Branch,and communicates the collected electric energy information with the management center,thereby monitoring and controlling the power consumption of the entire building,thereby improving the power efficiency.In this paper,the CC2530 chip is combined with the ARM11 S3C6410 intelligent control chip.The CC2530 chip collects the energy data,and the collected data interacts with the ARM chip,so that the nodes of the whole building can be monitored,and the ARM chip will receive it.The data is analyzed and processed,and the result is fed back to the CC2530 chip,thereby realizing remote control.The system consists of a ZigBee coordinator,a router,and several energy meters as terminal nodes to form an energy metering network.The main contents of this paper include:(1)Apply wireless communication ZigBee technology in the energy metering monitoring and monitoring system.In view of the characteristics of power concentration of the Agricultural Bank of China Jinzhou Branch,this paper uses wireless communication ZigBee technology to network and realize the monitoring and monitoring of electric energy.(2)The ZigBee wireless communication technology and ZigBee protocol stack architecture are analyzed and studied.Several common short-range communication technologies are analyzed and compared,and the ZigBee mesh network topology is used for networking.(3)The SoC chip CC2530 and ARM11 S3C6410 chip were used to design the hardware of the energy metering system.(4)The software design was carried out for the monitoring and monitoring system consisting of CC2530 and ARM11 S3C6410 chips.Software development of the ZigBee collector program,router program and coordinator program,and the corresponding program.(5)The CC2530 was tested for communication and verified the feasibility of the system.The paper has 23 pictures,5 tables,and 50 references.