Research On The Integration Strategy Of Assembly Construction And Space Operation From The Perspective Of Architecture

The materiality of architecture determines the inevitable relationship between space and construction.But at present,on the one hand,in the highly information-based image era,the design trend of architecture turns to one-sided image visual stimulation,ignoring the attention to space and construction;on the other hand,the assembly construction vigorously promoted by the state,more points to efficient construction,and the design method and related theoretical research of the integration of assembly construction and spatial design are relatively few.This leads to the simplification and simplification of the space design of prefabricated buildings.At the same time,the architects also miss the possibility of assembly construction in form and space.In view of these problems,this paper studies the integration of assembly construction and space operation from the perspective of architecture through theoretical research and case analysis,in order to put forward specific and feasible integration design strategies.In order to enrich the research content of the combination of design and construction,introduce the factors of assembly and construction in the research of space operation,and give the space connotation of architecture to the assembly and construction,in order to provide strategic reference for the space design of building based on assembly and construction.From the perspective of architecture,this paper takes the relevance of "space and construction" as the starting point,mainly from the two dimensions of "abstract" and "concrete","overall" and "local",studies the integrated design strategy of assembly construction and spatial operation.The paper is divided into four parts to discuss.The first part is the introduction part,which describes the background,purpose,significance and research methods of the integration of assembly construction and space operation from the perspective of architecture,and forms the overall framework of the article.The second part takes the abstract space operation and the concrete assembly construction as the object,analyzes the respective "local" composition and "overall" relationship,and then puts forward the integration strategy;on the space level,with the western modern architectural space design tradition as the main line,combs out four classic space operation modes and summarizes three operation elements: component,space unit and grid;on the construction At the level of architecture,the elements of assembly and construction are divided into four levels: component,module,system and system under the control of module.Based on the above analysis,the related elements of spatial operation and assembly and construction are integrated,and three integration strategies of component systematization,unit modularization and grid standardization are proposed.The third part is to elaborate three integration strategies: component systematization,unit modularization and grid standardization.Each strategy is analyzed from "abstract" space operation and "concrete" assembly and construction from "local" to "overall".Finally,the integration design strategy is further verified by analyzing typical cases.The fourth part is the summary and prospect.The paper establishes the correlation between spatial operation and assembly construction,summarizes the strategy system of assembly construction and spatial operation integration composed of component systematization,unit modularization and grid standardization,reflects on the deficiencies in the research,and looks forward to the future of the integration of assembly construction and spatial operation in coordination and parallel.