Development And Application Of Remote Automatic Meter Reading

With the development of society,the rapid development of various industries and the rapid development of ordinary people's life,the power equipment is becoming more and more diverse,and the marketing business processing is also constantly developing.At present,the existing The place where the automatic communication and meter reading system will be used for communication..Based on communication automatic meter reading power line system The power line does not need to be so dedicated to the laying of new lines,so The advantage is bound to heat up gradually.Since power lines included ultra-high voltage lines,high-voltage power lines,lowvoltage power lines and optical fibers,fiber-optic cables and carrier channels,there were many uncertainties in the power line carrier meter reading system.If the replication is unstable,the real-time performance will be affected,the interference will be very large,and the maintenance channel resource consumption will also increase.In order to improve the maneuverability and accuracy of power line carrier meter reading system and reduce the cost of artificial materials,it was necessary to increase the design and technical equipment of engineering application.In addition,using the power line carrier communication meter reading system,the routing scheme was an important technology for further communication to improve the communication performance of meter reading system,and was also an important technology for improving the communication performance of meter reading system.Hot spot of Communication problem.Aiming at the problem of power communication,this paper analyzed some important communication concepts of power line carrier communication,analyzed the characteristics of low voltage power line carrier channel for meter reading,and introduced the application of communication remote electronic carrier communication technology automatic transposition release system.The structure principle and characteristics of the communication system of electric power carrier wavelength meter reading were also introduced in this paper.In the system,multiple watt-hour meters were usually placed in the same instrument box,and each meter reading box is equipped with a collection terminal.The collector pulls the register out of several format tables and then pulls it to the concentrator.This paper introduces the unique ability of acquisition,and describes the concept of hardware and software.Finally,a self-correcting routing solution based on the power line carrier node meter system was proposed,in which the convergence of the electric meter reading in the east and west was what kind of thing to read the meter.At the same time,the certificate can obtained the relay routing table faster than the original routing algorithm,and the performance of the metal batching was better than that of the original routing algorithm.Figure46;Table5;Reference 41...