Design A Device Which Can Automatically Cut The Beak Of The Chickling By Electric Heating

Broken beak is the chicken process necessary process. By analyzing the relevant data and the current domestic and foreign beak trimming methods and equipment applications. Designed for small and medium-sized chicken households by electric heating beak broken beak automatic beak device.This paper describes the use of SolidWorks design Beak trimming device and its related parts. Design of conical chicks head fixed piece is to facilitate the automatic broken beak. Chicks in the form of linkage and holding mechanism is designed to meet the needs of the automatic control. The mechanism is designed to solve the need of high-temperature beak trimming, and the high-temperature hot-head unit is designed to break the beak by electric heating. In order to be complete and usable equipment, the design of the structure, shell and detachable mobile legs and other related parts. The application of the parts of the design SolidWorks assembly into assembly.Application of SolidWorks motion simulation test design of chicken wings organization whether there is any other problem and needs. Through the SolidWorks simulation on temperature field with high temperature parts. Analysis of high temperature components design temperature can reach the design requirements and the protection requirements. According to the principle of PID temperature control, the temperature control scheme of high temperature components with closed-loop feedback control is designed. Selection and purchase of equipment to verify the feasibility of the temperature control program. Pneumatic control under the conditions of the design by the cylinder control motion control program. At the same time repeatedly modify the control procedures and experiments. And finally completed with a certain practical Beak trimming device design.