The Adaptive Structure Unit Research For Pathological Workstation Based On The Technology System Evolution

The design of adaptive structure unit is conceived under the guidance of technology system evolution theory, combined with the actual pathological workstation development and design, according to the demand of design and structural characteristics. Among them, "Adaptive" also reflects a kind of flexible design thought, is a new method of product Hand-board model design.In the design stage of a product hand-board model, it can not only create a model quickly, but also can be edit a model based on the previous dynamically, so there are a variety of structural units get maximum reuse, provides a more convenient, fast and efficient method for product design. Based on the pathological workstation as the research object, technology system evolution theory as the support, from the whole structure of the pathology workstation, including create, adjustment, information extraction and mechanics analysis, studied a way of rapid design and modification for the product hand-board model.From the point of view of function and structure, making the overall structure of the pathological workstation hand-board model unit module division, and in view of the different parts of the model, developed the suitable unit combination. The whole process of model building into the choice of each unit, self-organization process, and make the real-time adjustment according to requirement of the product design, achieveing the structure of the dynamic editing, improve the efficiency of the model changes, greatly improve the innovation ability of product design.At its own characteristics of adaptive structure unit, for each meet the unit to carry on the design and modeling of different functions. Including the principle of establishing structure unit, material selection, the size of the analysis and the requirements on cooperation between the units, making the method of design be more perfect, more generality.After building overall architecture of pathological workstation, need to carry out ANSYS static analysis for every parts, including the analysis of the main unit cell and the overall analysis of the structure. Through the analysis to the overall size of the deformation size and stress, verify whether it can meet the actual requirements, So that it can modify and optimize for the structure,material, size and other of unit model.As the design method of adaptive structure unit is put forward, make the pathology of workstations and other similar products hand stage design quicker and more flexible, not only saves the time of product design, but also save the design cost. It has important significance for a new product development, design.