The Dimension Analysis And Synthesis Theory/Software/VP Of Cam Mechanisms With Floating Positive Follower

The research focus on the cam mechanisms with floating positive follower.Firstly,putting forward a accurate description and method on the problem of generic class mechanism synthesis based on the study of problem of class I/ class Ⅱ.The problem of generic class mechanism synthesis is not only more general,broad,revealing the existence of a optimal solution,but also has more important theory value and practical significance compare to the problem of class I/classⅡ.The following are main research contents:1)Exploring the solution of the cam center and the allowance of minimum base circle radius on the problem of class I of the cam mechanisms with floating positive follower based on high speed press.2)Exploring the solution of the roller center and the allowance of minimum base circle radius on the problem of classⅡof the cam mechanisms with floating positive follower based on high speed press.3)Putting forward a accurate description and method on the problem of generic class mechanism synthesis.4)Based on the analysis and synthesis theory and the software system,a virtual prototype was establish to simulate and verify the correctness and validity of the theory and software system.The paper focus on the extension of problem of class I/ classⅡand the problem of generic class.Exploring the relationship of the basic dimension parameters has an important theoretical value and practical significance in putting the objective institutions into engineering application by using the technology of software and virtual prototype.