Design And Implementation Of Secure Line Quality Detection System Based On Machine Vision

At present the company safety production line process, the quality and safety of production line is the first appearance of the quality inspection. Judging product quality through thehuman operator in the operation process of the equipment, and combined with the quality department quality inspection personnel are the head and tail of sampling inspection. Thismethod is of low efficiency, poor accuracy, high failure rate, and can not meet the need ofsafety quality inspection. Quality inspection of the safety line of products mainly includedetection of printing and cutting of two processes, each printing printing quality detection isa manual sampling, can not understand the specific situation of comprehensive quality of printing products.This paper mainly introduces the design and implementation of security line quality detection system, the application of machine vision to online safety line image quality detection. Machine vision system is to give the machine or automatic production line to adda visual system, the principle is the visual behavior by a computer or an image processorand related equipment to simulate the human visual system, complete with the information obtained by. The system can accurately find the first time the defective productappearance problems and timely feedback, timely guidance to operators of testing tools,and the control point forward quality safety line.In this paper, the design principle of the safety line machine vision system developed a set of suitable for the production of our company quality detection system based on a detailed description of the safety line, machine vision detection system is designed based on the quality of the application, including the composition, the hardware design of the systemsoftware design process, image formation algorithm and production test flow. On this basis,gives a safety line quality detection system application scheme. Security line quality detection system design can effectively improve the detection accuracy of the currentproducts, increased from 0.05 mm to 0.02 mm, to expand the product range of detection,increase multiple product testing, the product can meet the requirements of imaging to achieve automatic detection.