Process Plan & Control Of Vehicle Out-panel Die Project

With the rapid development of China auto industry, requirements change more frequently in the process of automobile parts development, such as apply of new technologies, Shorten project development cycle, improvement of the product market competition and so on. These requirements change will certainly cause the target changes in the process of project implementation. And if proper adjustments can’t be offered on time, they will lead to project delay or rising of project’s cost, and even failure.In order to better cope with these problems, the thesis is trying to establish the vehicle out-panel die develop project plan and optimized it by NPT. The application on A13 car type hood inner die of S Vehicle Co.Ltd prove its’ efficiency. Aim to different types of requirements change in vehicle out-panel die development, the thesis combine NPT and CE theories to control and adjust the process dynamically. Using the above method on A13 car type hood inner die of S Vehicle Co.Ltd can reach the target to short the project development cycle, especially when the project meets requirements change. So the method is suitable for applying in the field of vehicle out-panel die development.The thesis focus on the requirements change in vehicle out-panel die development project, and it’s benefit for the similar field of other vehicle parts development process on dynamic control and adjustment.