| With the development of our economy, computer is playing more and more important role in every industry, including the construction industry. This promotes the development of building software.At present, there is much popular structure finite element analysis software, but these software’s post-processing parts are only for themselves. When a project is complex, structure engineer must contrast the calculations from more than two kinds of finite element analysis software. So the post-processing software should read the results from multi software. After the finite element analysis software calculating, the designers have to check the results according to relevant codes. This gives birth to checking system of post-processing software.This paper mainly studies three parts: The data reading methods of the finite element analysis software; The data organization of finite element analysis software; The software development of checking system.The calculation results are mainly from SATWE software and PB software. In this paper, the reading methods of text file and binary format file from SATWE are discussed, and the way to improve reading speed by using multi thread is also showed. For the PB software from PKPM company, the author loads dynamic link library and then calls the interface function by using multi thread.The data organization part focuses on the relation of data and way to organize structure data. The part implements the data organization by VC++, that lays the foundation for the exhibition in the interface module.The checking system includes two parts: the checking of design parameters and the checking of calculation results. The parameters part discusses the way to check main parameters by engineer experience and the codes. The calculation parts examines the regulation of structure, the stability of structure,the displacement of structure and the other important calculation results by the relevant code clauses. |
PDF Full Text Request