The Research Of Ride Page Unit Of The Cam Mechanism Of SH300 Riding Binding Linkage Line

With the rapid development of people’s cultural needs and printing industry, the importance of finishing in the printing industry is also increasingly stand out, especially the post-press binding.As an important equipment in the industry of post-press binding,Horseback riding binding linkage line also develop towards the automation and digital human at a high speed with the demand of the market.The same stability caused by the high speed related issues also emerge in the actual production.Riding binding linkage line manufacturers found the problem of book floating page which due to the machine high speed production in riding binding linkage line, and this problem seriously affected the production efficiency and stability.It has a very big significance how to solve this problem to improve the stability of the whole machine of riding binding linkage line.The Anhui Huayin mechanical and electrical co. LTD. put forward the solution of the problem in the production of its new SH300 riding binding linkage line design.The machine add a set of books CAM on a page on the axis of rotation, driving the original invitation card swinging rod movement through the CAM to send out an invitation card swinging rod by the original single speed (high speed) post page, absorption into a movement under the condition of invariable cycle and high speed post slow absorption page form of exercise.This change makes the whereabouts of book binding speed relatively slow, in the process of put page makes the gram weight more lighter thin book post to reduce the influence of airflow to book in the process of falling, floating pages to a very good solution.This solution also realized the implementation of the stability under the condition of guarantee efficiency.This solution is designed personnel in equipment production, through the optimal result of field test, and was put on the market, to get the recognition of riding binding linkage line using manufacturers.In contrast,this issue has been resolved, but this design has not been the corresponding theoretical support. The research direction of this article is about the horse riding binding linkage line.Building on book page machine CAM performance research through the three-dimensional modeling software based on the book of the CAM mechanism 3D model. Then using ADAMS software simulation analysis on the movement characteristics, which movement curve;ANSYS Workbench software and modal analysis were carried out on the CAM, which can get the first 6 order natural frequency and vibration mode, and the basic grasp on book CAM of the modal frequency. It can provide a certain reference choosing appropriate sent out an invitation card to a page machine speed and suitable to effectively to avoid the resonance frequency of the motor parameters.This will have a vital role through knocking to a further improve the book of the CAM contour curve of CAM to get a more reasonable send out an invitation card of swinging rod motion law. And could provide an important theoretical basis in order to further improve the machine performance and the stability of the whole machine.