The Key Technology Research For Implementing An Automated Flock Feeding System

The past five years the central document emphasized the importance of thedevelopment of modern agriculture. Poultry industry as a key component of agriculture,especially in broiler hens for people’s daily life provide a high quality material needs. Themodern scientific knowledge applied to poultry farming system (automated feeding systemchickens), it has been in the development of modern agriculture to get attention. Automatedfeeding system in foreign flocks nearly60years of development history, and into the highlyautomated stage. While domestic flocks automated feeding system is basically in imitation ofthe production phase, the lack of systematic theoretical basis for the design and advancedtechnical knowledge of the key, seriously affecting the entire industry development andinnovation.Through this paper, automated feeding system on domestic flocks weaknesses analysis,the use of bulk mechanics, mechanics, finite element analysis on traffic feeder, coil springsfeed conveyors, silos for temporary storage sheds outside the feed composition and otherimportant some research, drawn systematic theoretical design basis for the automated feedingsystem chickens localization and innovative development work for reference. The maincontents include:[1] Designed to avoid the traffic feeder pinch chickens remind institutions, and thesolution can not quantify feeding, feeding uneven flat feeder. In order to derive a project as acase feeder road driving power, speed theoretical design basis;[2] Analysis of the feed in the feed conveyors coil spring during the movement of thededuced horizontal tilt coil springs feed conveyor speed limit and drive power to design andproduce a prototype for field experiments, testing and validation of different speedsthroughput;[3] Statistical analysis of the reasons for the collapse of the silo. The use ofthree-dimensional design software Solidworks silo collapsed three-dimensional modeling ofthe key components of the finite element analysis,and proposed the mechanical structure ofthe improvement program.This paper feeding flocks automation system involved technical difficulties in thedevice conveying the material particles (feed) characteristic, such as diameter, generally inless than3mm, when transporting a fluid flow characteristics, the accumulation stop featuresa solid, can not be used alone or hydrodynamic analysis of solid mechanics to obtain thedesired result. Requires the use of physical knowledge scattered its research and analysis, and the design and manufacture of the relevant experimental prototype checking. Paper feederroad designed, coil springs feed conveyors are in production and transfer of customer use, theeffect is not worse than similar foreign products. Its theoretical basis and feasibility are to betested in practice.