Guangzhou University Town Campus Architectute Outside The Window Shade

According to statistics, at present, the building energyconsumption accounts for about30%of the total energy consumption society,energy conservation success rate less than10%of building energy savinghas become compulsory standards of the construction industry, buildingshading is a important means to save energy consumption, combined withthe average temperature in summer in guangzhou region are in31~33degrees Celsius, and the time for April, air-conditioning energyconsumption of large amounts of waste.This article first to the ten universities in guangzhou universitytown campus building actual investigation, and then according to theresearch results of guangzhou university town campus building shadingform contained classify, mainly divided into horizontal blinds, verticalblinds, comprehensive type, baffle type shading shade form; Then for eachkind of form of shading shade solar radiation measured effect and impacton lighting and ventilation. The main effect of solar radiation is usingEcotect software built-in virtual trajectory, the sun shading simulationform whether can meet the full window shading effect; Then use Ecotect,shading of the Phoenics software to test software simulation and analysis,analysis of the sunshade shade solar radiation form effect and influenceon lighting and ventilation, and according to the result of softwaresimulation and the measured results are compared; Finally to quantitativeanalysis of all kinds of shading, and sums up the shade form of advantagesand disadvantages.According to the guangzhou university town campus building outsidethe window shade of the shortcomings, is proposed to solve the problem.Finally through software simulation and analysis solution. Premise condition is the following conclusion: meet the May1to September31time range, at8:30every morning to the afternoon4:30meet full windowshade.1. Draw a campus building of east, west, south corridor sunshade inproportion to the height and width of the problem;2. Draw a horizontal shading in SBW45°to45°south by east towardthe range, horizontal shading to pick out the distance with the windowheight ratio, according to the proportion of all can meet the full windowshade.3. Draw a vertical sunshade in SBW45°to45°south by east towardthe range, vertical sunshade pick out the distance and the proportion ofwindow width, according to the proportion of both can satisfy the fullwindow shade.4. Draw a comprehensive type shading in the south by west45°to45°south by east toward the scope, comprehensive type shade pick out thedistance with the window height ratio, according to the proportion of allcan meet the full window shade.