The Application And Investigation Of Safety Standardization In Commissioning Supervision Of Guangzhou Water Engineering

Safety in production has became an important content of building a harmonious socialistsociety. With the growth of cities, the increase in the number of people and the heavy rainfallsin big cities, Urban Water Engineering has been in a surge of construction at the same time. Inorder to work more scientific and normalized, the supervision agency of government whichaims at supervising the safety in production of the construction of water engineering has beenexploring a set of Supervision Standardization System. It is even more important to perfect theword of Commissioning of Supervision which is the first step of the Supervision. The work ofCommissioning of Supervision is always carried out empirically for a long time. Workers judgethe safety problems and safety levels as his experience. So it is very important to establish thesafety standardization of the Hand-over of Supervision.This article has used comparison research, case analysis method, the qualitative analysisand the quantitative analysis unifies, quantitative statistic methond. At the same time,synthetically utilized the domestic and foreign experts’ research results, analyzed presentsituation and the existence questions of the supervision work of Water Engineering. The articleshows the principles and constructions of safety standardization. It also introduces the scientificcalculations of weight representing the grades of the Safety Checklist given by workers whichis based on Analysis Hierarchy Process(AHP). Finally it gets the conclusion that it’s necessaryto use PDCA method during the commissioning supervision.This article gives the method of PDCA many details. Combined with practical engineering,this article has raised some thoughts of safety standardization of commissioning supervisionand analyzed some practical examples. By collecting feedback opinions and suggestions ofcooperated-builing parties, the article summaries the problems of the practical use, and providesoptimization proposal. It has verified the feasibility and effectiveness of the apply of safetystandardization during the commissioning supervision of Water Engineering, which providessome reference and help to the workers who work on commissioning supervision or supervisethe whole process.