Studying And Discussion On The Main Problems In The Process Of Coke Oven’s Reform

The coke oven is one of the most complicatedindustrial heating furnaces in the field of metallurgical industry. Fromcoke oven masonry and beginning to installate the technological facilitiesto the normal production, it needed to experience many links, such asdrying oven, debugging, starting operation and so on. Sometimes it alsoneeded to blow out the coke oven from high temperature condition in theproduction to normal state in some very special circumstances. In thesecomplex engineering operation, it exists many problems in each links dueto the various uncertainty factors. Sometimes the problem solution anddegree are related to the quality of production directly. Some may berelated to the life of coke oven. This article begins with Coke ovenmasonry, detailed introduces the preparation of coke oven masonry; theCoke oven masonry procedure and attention; Coke oven’sdecision-making, firing ways and attention; Coke oven starting andmaking calibration scheme and much attention should be submitted toprocess parameters in the production operation. With the aging of thecoke oven, coke oven repair issues are reflected gradually. In order tosolve this problem, a detailed description is put forward to solve how torepair of the parts, repairing decision-making, repair mode. In addition,there is a description about the ways of boiler stop decision-making andso on. Above the whole manipulation, it exists many problems. Thearticle not only points the problems, but also analyses and discusses thereasons, at the same time puts forward the methods and measures.