Study On The Treatment Technology Of Cut Stems Of Cigarette

Changde Cigarette Factory studio Stem expansion joint line was mainly introduced by the United Kingdom Dickens technology and equipment, but the quality of their work stems filament in the consumption process has not been improved.With the research of the key processes of the line in the paper, we improved the processing quality silk stems, reduce consumption levels. The main conclusions are as follows:1, Tobacco stem which in different years and areas, the accessibility differences, to analysis the differences in moisture absorption by tobacco stem analysis, and the corresponding group, we can effectively reduce the fluctuation of the water wire stems.2, In the experimental range, through investigating and analyzing of the parameters of the STS-FBD, we knew that increased imports into the STS Stem STS, and raise the temperature of the steam injection volume expansion effect is conducive to the improvement of stem wire, Cut Stem appropriate to reduce the thickness and FBD to maintain proper air temperature gradient is poor or zero gradients for Stem expansion effect of the increased benefit.3, after the technical transformation of FBD tunnel dryer the dryer soft and loose silk stems, and the moisture range of FBD has been reduced moisture content accuracy is also stable.4, in the test range, the stem-line parameter optimization results show that:①Admonist process, low-flow (2000kg/h) and low cylinder speed (40Hz) of the process will help achieve the swelling effect of tobacco stem; low temperature in the environment time, Admonist treatment setting 29.00% moisture, the stem structure of silk and filled with high values,②pressure stems process, the pressure when the stem thickness of 1.00mm, Stem structure and padding are better than other parameters.③stems cutting process, the stems which in 0.16mm-0.18mm range, the structure and padding of the stems are best.