Range Measurement And Control Equipment Index Design Method

The range C&S facilities are advanced and complicated. For the engineering feasibility of the facilities are demonstratwd well before they have been started to make, their specifications must be analyzed and demonstrated in "General for C&S" Facilities Testing", "Specification Designing for Radar", "Specification Designing for Optical Measurement Facility", "Specification Designing for Telemetry and Command Facility".The paper gives the specification designed method and limiting factors for the radar, the opical measurement facilities, the telemetry and command facilites. It discusses the foundation, the requirement, the demonstration and demand analysis, and imvestigates method for C&S facilities. In the specification designing, the articles of the specifications are extreme range, tracking accuracy, bit error rat, transmitted power, reliability for the C&S facilities, their specification demonstrative method is given in detail.These methods are applied the functional requirement, the specification designing before the range C&S facilities have been made. They follow the development trend of the range C&S facilities, and meet the requirements of the specification designing. They have the important significance for made of the range C&S facilities.