Fault Processing Of Optical Fiber Communication Error Code In Substations

Currently, optical fiber communication in power has been widely used in communication; has occupied the mainstream and the growing range of applications. The failure error is more common in optical fiber communication. It gives accurate and reliable optical fiber communications to run cause great harm. Therefore, failure of substation processing of optical fiber communication error analysis summarized research to identify effective error-fault approach, will largely guarantee the normal operation of optical fiber communication, and thus on the safe operation of the present tremendous communications power guarantee. This article on optical fiber communication error fault substation approach for detailed analysis.This paper research work are as follows:1, Introduction of optical fiber communication, this paper expounds the developing situation of electric power communication optical fiber communication in the important position. This paper put forward the research significance.2, The definitions and related to the ber performance analysis, this paper discusses the basic theory of optical fiber communication error.3, Analyzes the zhaoqing PSB optical fiber communication system present situation, based on this discusses and summarizes the substation fiber communications systems each main component miscode fault main reasons.4, The depth of error substation fiber line fault, SDH equipment, PCM equipment failures and errors in the handling of error-fault, and then proposed substation fault approach to optical communication error.5, The above error approach used in the failed instance to verify the feasibility and practical significance.