SI Product Test Platform

In recent years, China Mobile, vigorously promote the ADC operations, ADC service makes a certain degree of development, but also found a number of obstacles inevitably which block ADC business development. Typical problems include: the information needs of small and medium enterprises themselves is not clear, resulting in the low customer satisfaction after product formally operated; The ability of platform business customization is low, requires a lot of secondary development; the cycle of ADC products from the shelves to the official is too long; industry applications using a single scenario, causing the coverage of user is narrow, cannot form user scale and so on.This article aims at the issue of that the cycle of the ADC product introduction is too long. This paper intends to design and implement an SI product test platform, which is mainly used in the interface test before ADC product started the business associated test. By using the platform can significantly reduce the interface problems which would be found during ADC products business associated test in the past. Can greatly enhance the efficiency of ADC products business associated test, and reduce the ADC product introduction cycle. So mobile and SI (service integrators, also known as partners) can achieve business benefits faster.SI product test platform studied in this paper is designed and developed based on the existing interface protocol of ADC and BOSS, ADC and SI. Core function is to achieve a simple and efficient test process for the SI product testing personnel to test the interfaces. The platform should have certain flexibility to configure based on the actual situation of SI product interface, try to avoid and reduce product-specific personal development. The test results of the platform should have detailed instructions. Which make SI testers quickly locate a specific issue according to test results, and help SI developers to correct the interface in short time.