Design And Analyse Of Equipment For Honeycomb Paperboard Production Line

With increasingly fierce world trade and the international community of environmental protest, low-carbon technology requirements, relevant industry package installation demand for new materials, new technologies, new products increases rapidly. while foreign advanced countries on export packaging industry raises new challenges and urgent requirements change the foam and plastics-based packaging materials. Honeycomb as a new environmentally friendly material, not only can effectively savings and reduce the use of timber resources, but also greatly reduce the use of packaging foam, honeycomb paper on the domestic market Board demand is also growing. China's civil honeycomb industries have less than 20 years, the honeycomb manufacturing process and equipment not yet mature, the cellular products manufacturing technology and quality compared with advanced countries in Europe and America there is still a gap. Currently, the domestic mechanical properties of honeycomb structure study more, but the manufacturing equipment of honeycomb is very rare.The topic subject is honeycomb production line design and performance analysis of key equipment. The subject to solve the problem is the analysis of the status of internal honeycomb device, combined with the existing co-operation unit Hydrosol honeycomb production line problems, development of hot-melt coating technology based on honeycomb paperboard production line. Refer to the honeycomb cardboard of the production route, given the key equipment used in the design process principle and calculation method, such as the constant tension roll cage design, adjustable belt machine design, melt machine design. Designed by Mitsubishi PLC control of production line equipment, and use the CC-Link fieldbus as the device controller of the standard interface, through the touch screen real-time monitoring of each module.In order to achieve stable, continuous for the paper, analyzed the paper roll in the ideal, non-ideal circumstances, start, run, brake force process, through the roller bodies floating in the process of elimination of transmission fluctuations, magnetic powder brake to maintain a constant speed the delivery of tapes, and according to the roll out of the three stages of the preparation process of the force sequence.Universal testing machine on honeycomb cardboard for the second test of static properties, extract critical data, design a conveyor belt's primary motor and lifting motor and belt of stent conducted analysis, the results indicate that bracket deformation in the control. Also in the hydrosol honeycomb cardboard production line in the lift mechanism to debug. Starting from physical characteristics of hot melt adhesive, designed melt glue machine structure. For the production of high quality hot melt rubber, Adopt FX_2N-2LC temperature control heating hot melt adhesive control module to control the use of determination of value is not fully differential type PID algorithm. Finally, experimental verification algorithm melt glue machine accuracy.