Research On Work Principle And Simulation For T/SD Horizontal Sectional Inertia Conveying Equipment

The Triple/s Dynamics conveyor is the most productive advance in horizontal conveying equipment since the principals of natural frequency were applied to conveyors over fifty years ago. The horizontal motion conveyor is not built like and does not perform like common vibrating conveyors. Conventional vibrating conveyors use a straight-line motion (at an angle to the conveyor surface) to convey material by repeated impacts. The conveyor uses a completely-horizontal, slow-advance, quick-reverse motion which works against the inertia of material in the product bed,causing the material to slide along the pan of the conveyor during the conveyor"s quick-reverse stroke. The conveyor has no springs to maintain,and has no need for speed and stroke "tuning." As it is not a "tuned" spring-mass system,the TS/D can be operated with variable speed controls for adjustment of the material travel rate. A further benefit of the TS/D drive system is that it can not be "detuned"by increased material loading.Reversible flow direction is an optional capability.T/SD Conveyor including 3 sections, which are charging section, preheating section, connecting car section. Total Conveyor was supported and regulated by distributed suspended tie rods. During the conveyor is running, the suspended tie rods will produce enough and effective vertical dynamic force.This article study the principle of the T/SD conveyor starting with the difference of working performance between the common conveyor and T/SD conveyor, establish a mathematics module of conveyor, analyze the effect on the working performance of conveyor under different working parameters by computer software-MATLAB, afterwards analyze and design the conveying equipment.