Design And Study On Project Of Crankshaft Complex Lathe

The crankshaft composite cutting test device is a newly developed for machining crankshaft lathe. It uses the parallelogram principle which we learned from mechanical principles, to realize the crankshaft cutting, can solve the multiple clamping problem in the process of crankshaft cutting. The main content of this article is making the research project design on the basis of the compound cutting test device, in order to effectively solve the problems in the practical production.This paper on the basis of the existing test design, analysis the turning principle and structure of the machine tool, and discuss the scheme design issue, and the main technical parameters of the lathe. In the overall scheme design, we discusse the advantages and disadvantages of different options, and finally determine the overall plan for the machine.In the third chapter of this paper, mainly discussed the scheme design. This chapter on the basis of analysising automatically changing tool device, discusses various sword which the layout scheme for tool library, namely, various tool library applied occasion. analyzes its change the time measurement Finally,determined the cutter replacement plan, and analyzed.The test-bed has the top-three claws chuck plan which exist great shortage now. Based on this reason, determine to change the orientation of machine tool clamping, and puts forward four claw floating clamping institutions plan. Guide rail structure also exist manufacturing precision, etc, adopt standard component linear guide improvement. In this paper, the final chapter of the existing institutions of cutter test-bed of bad to change synchronous belt transmission, the gear transmission instead of synchronous belt transmission counterweight dish, adjust and clamping institution into a worm and worm wheel mechanism, favors the counterweight dish adjust and clamping.