Font Size: a A A

A PRECISE DETERMINATION OF H/M(E) USING A ROTATING, SUPERCONDUCTING RING (PLANCK'S, ELECTRON MASS, FUNDAMENTAL)

Posted on:1986-10-05Degree:Ph.DType:Thesis
University:Stanford UniversityCandidate:FELCH, SUSAN BENJAMINFull Text:PDF
GTID:2471390017960547Subject:Physics
Abstract/Summary:PDF Full Text Request
A precise determination of h/m(,e) (Planck's constant divided by the free electron mass) using a rotating, superconducting ring is presented in this thesis. The measurement is based on two macroscopic quantum properties of superconductors: the quantization of the magnetic flux inside a superconducting ring and the London moment, a magnetic moment generated by any rotating superconductor and proportional to the spin speed. When these two magnetic fluxes are balanced against each other (a flux null), h/m(,e) can be found by measuring the spin speed at that point and the area bounded by the ring. The superconducting ring used in these experiments was thin-film niobium (20-(mu)m-wide by 400-nm-thick) deposited by electron-beam evaporation around the equator of a 5-cm-diameter, fused-quartz hemisphere. A novel photolithographic, lift-off technique was used to define its width and location. The cross-sectional areas of this ring was determined to an accuracy of 8 ppm. The hemisphere also acted as the rotor for an all-quartz, cryogenic, helium-gas bearing. Simultaneous measurements of the rotor's spin speed and the quantized magnetic flux inside the ring generated the information necessary to calculate the value of h/m(,e). This work has determined h/m(,e) directly to an accuracy of 100 parts per million (ppm), a higher level of precision than previously reported (400 ppm). Recent theoretical calculations have predicted a relativistic mass increase of 150 ppm for electrons in spinning, superconducting niobium, but the uncertainty in our final results prevented the clear identification of this effect.
Keywords/Search Tags:Superconducting, H/m, Rotating, Mass
PDF Full Text Request
Related items