| Being a student of Electrical engineering department of Polytech Nantes in BAC+5,I need to carry out an industrial internship of 5 months as my project of the final study.This report of the 5th year’s internship presents all the main work I did during the internship in Agency Nantes SNEE from 12 April 2017 to 21 August 2017.Chapter 1 presents the company SNEE and the agency Nantes,and the main content of the internship.Chapter 2 presents the important and basic standard NF C 15-100 and CCTP often used in most of work,and what they serve.During the internship,my main job was to serve as a designer assistant and actually participated in the design work of SNEE’s electrical engineering projects.Beginning with the Chapter 3,this article will introduce the main work done during the internship chapter by chapter.Chapter 3 presents how to design the layout plan of dwelling with software Auto CAD,including common types of sockets,luminaires,switches of luminaires and special considerations for people with disabilities.Chapter 4 describes the use of simulation software ELIUM 3.1 to complete the design and calculation of low voltage distribution network of building.Chapter 5 mainly introduces the study of illuminance with software DIALux,which is mainly a comparatively complicated simulation calculation of the illuminance of stairwells.Chapter 6 briefly presents the design of the distribution panel of dwelling with software XL Pro3 400. |
PDF Full Text Request