The Design And Implementation Of The IPv6 Intelligent Home Mobile Terminal Control System

People rely more and more on the development of high technology,so only the home industry will gradually become a promising industry.Although there are good prospects for development,smart homes have not been able to be fully used in reality.The main reason is the problem of IP addresses.IPv4 addresses were allocated in 2012,resulting in a lack of IP addresses.Therefore,to fundamentally solve the IP problem,it must be applied to the next-generation Internet technology-IPv6 technology.At the same time,the most mature and widely used Lo-WPAN network is the ZigBee technology.Therefore,if you can integrate IPv6 technology and ZigBee technology into the smart home industry,you should achieve good results.The system adopts a system model similar to the C/S mechanism.The user terminal is mainly an Android mobile phone application program used by the user,and the server terminal mainly includes an intelligent terminal device,a ZigBee network,and a protocol gateway.In this system,sensor awareness information is first sensed,then the data is uploaded to the ZigBee network,and then transmitted to the protocol gateway via the ZigBee network.The protocol gateway provides the client with an interface for accessing data.The sensing device is composed of small sensors,which mainly include relays,temperature and humidity sensors,and other sensor modules can be added according to requirements to achieve the purpose of sensing the home environment,home appliance control,etc;ZigBee network adopts hierarchical tree topology In addition to the completion of some ZigBee network and IPv6 network protocol conversion functions,the protocol gateway also provides data interfaces for client applications.The client is an APP application implemented on an Android smart phone.Android applications are mainly used to monitor wireless sensor status and control smart terminal devices.The design mode adopted by the application function is "Activity" + "Service".The main purpose of this selection is to ensure the stability and reliability of the application program.The main purpose is to guarantee the functionality and user experience.At the end of this paper,the smart home system is tested through practical application scenarios to demonstrate the integrity of the system.