Design And Research Of Covering Press

With the improvement of people's living standards and the change of consumer concept,the consumption of canned aquatic products and beverages is increasing year by year,the demand for can-making machinery is increasing,and the competition among canmaking enterprises is becoming more and more fierce.How to improve production efficiency and reduce costs,this is a difficult problem facing the can industry.This article optimizes the design of the lid-making press according to the needs of the enterprise to improve the efficiency of the press and ensure the processing quality of the lid.The main contents of this topic are as follows:(1)Designed the key parts of the capping press.According to the processing requirements,the key components of the press transmission system and the press body are designed.(2)The ADAMS software was used to optimize the four-bar mechanism of the capping press.Set up a prototype of the transmission system in the ADAMS software,use the simulation function to simulate and analyze the displacement,speed,and acceleration of the slider,and determine to reduce the speed fluctuation as the optimization goal according to the simulation results,and then optimize it using the ADAMS parameterized design function According to the analysis,the optimized slider speed curve is smoother,which improves the working stability of the capping press.(3)Using the SoildWorks software to carry out static analysis and modal analysis on the body of the capping press.Mesh the simplified model of the fuselage,add loads and fixtures,define materials,and then perform static analysis to check the strength of the press fuselage.Through the modal analysis of the fuselage,the natural vibration frequency and vibration mode of the fuselage are determined,which provides a basis for reducing the vibration of the press fuselage and the noise..(4)Three-dimensional design of the lid-making press mold.According to the requirements of the company's can lid processing,a mold for the cap-making press was designed.Accurate mold design is an important factor to ensure the quality of the can lid.