Automatic Separation System For Short Fiber Head And Tail Wire

In the process of short fiber processing of polyester fiber,when short fiber products have higher requirements on defects,by setting the time of cutting off the winding repair plate and starting the head time.Estimate the time of appearance of the finished bag with head and tail wire manually,Set a wide range to eliminate finished packages that may fall into the head and tail wire,due to the limited estimation accuracy,there is a large error,in the process of real prodcution,and the number of packets removed is larged and inaccurate.To solve this problem,It is required to accurately identify the position of the head and tail wire gauged point in the post-processing stage,and effective isolation.Ensure that there is no head and tail wire in the qualified package.The process of producting short fiber head and tail wires is analyzed in this paper,designed a automic separation system for short fiber head and tail wire.This system detecting the specific points location for head and tail wire,record the time point of broken wire during winding process.At the end of the barrel,compose a head and tail wire time stamp data file.In the process of barrel matching,according to the parameters generated on site,Reposition the times tamp position,In the shear packing,identify the position of head and tail wire,to ensure that there is no head and tail wire in the finished package.This subject has completed the head and tail wire detection system,the hardware system and software system based on embedded control system are designed to detect the short fiber head and tail.This subject has completed timestamp recorded and data processed system,the information acquisition and data processing of head and tail wire are realized in the reciprocating position of spinning,the data communication with spinning is realized by optical fiber communication,and established the data processing system of front and rear spinning.This subject has completes the automatic separation system for head and tail wire,the management system of head and tail wire has been established at the drafting position,achieved the prediction function of the head and tail wire entered the finised products,and the packaging post installed the head and tail wire alarm equipment.