Remote Control System Based On Ethernet

This thesis is a new type of smart home solutions.The traditional smart home program,it will have a custom gateway,usually.The border route plays the role of convergence,to complete the uplink and downlink communications.Traditional gateway is customized to resolve the private protocol,generally.So the board route can't be made into general equipment.It's the biggest pain point of the traditional smart home.This thesis is the research of information intelligent home program.It will replace the traditional gateway by using the border route.So it will be compatibility,easily,and humanly.It's the biggest bright spot in this thesis.The system will complete the remote control system.And it designed based on ethernet.The main control chip of system is I.MX6UL,and the RF chip is KW24.The basic principle is as follows:On the one hand,it will receive the data by ethernet and analysis it.And it will extract the ip information and the pure data.Then it will send to the thread module by the serial port.At last it will send packets to the downlink of the thread network by thread module;on the other hand,it will receive the data by thread module.And it will automatically add the network layer data and become Ethernet packets.At last,it will send packets to the uplink by ethernet.So it will solve the problem of the data conversion between Ethernet and thread,perfectly.and these two datas can be exchanged directly on the network layer,and it will abandon the private protocol analysis within traditional gateway.So the board route can be made into general equipment.It's the biggest bright spot in this thesis.