Structural Design And Manufacturing Analysis Of Moldable Mold For Production Equipment Of Pitaya

Science and technology are developing rapidly,The quality of life of the people is steadily improving,The demand for agricultural products is increasing,This raises new requirements for the cultivation of agricultural and sideline products.Under the situation of increasingly fierce competition of agricultural products,Not only agricultural production equipment,And its corresponding agricultural products cultivation tools have also been attached importance to the machinery industry,In the future,the production mode of agricultural products will become more mechanized,Automation and intelligence.Provenance America Pitaya friut Anthocyanin rich,Vitamins and water-soluble dietary fiber and other nutrients,In China has become one of the daily consumption of fruits.In recent years,The growing area of domestic pitaya,Only Guizhou province has nearly 110 thousand acres of Pitaya planting base,Most of them are still in the way of planting,The degree of mechanization is almost zero.Therefore,Standardization of production of Pitaya support,Mechanization and automation to expand the scale of Pitaya planting,Cost saving and pitaya growth environment,To enhance the competitive advantage of the Pitaya industry.The main research of this paper is the structure of the mould and the manufacturing technology of the cement support parts machine,Specific contents are as follows:(1)In the analysis of two different schemes,Determine the design.After determining the scheme,Hydraulic pressure type,Mechanical pressing method,Finally choose a way according to the situation,The cement mortar can be distributed evenly in the cavity,And its dense,Achieve molding requirements.At the same time,the influence of the reasonable gap between punch and die on the forming is investigated,Comprehensive consideration should be made to determine the reasonable gap between convex and concave die.Finally,the design and calculation of punch die and die assembly are carried out,The modal analysis is carried out to verify the model.(2)According to the method of the common mold processing technology,the main processing technology of the concave convex die is studied.This thesis is based on the working principle of Pitaya support,select suitable design die design,the punch and the support component of pitaya,and carries on the modal analysis,to ensure the safety and reliability of its work.