The Application And Implementation Of Three Remote Control System In Urban Lighting

Urban lighting control system is a huge,but with new materials,new technologies related to the integrated system in urban road lighting system,using remote communication technology,wireless sensor technology,the size of traffic on the road,according to the ambient light,etc.dynamic lighting power factor adjustment,energy saving electricity,but also can reduce management costs.With the transformation of the old city and the new city of Neijiang construction have been expanding,Neijiang city lighting also simultaneously incorporated into the planning,will be lighting associations and industry requirements towards the use of new technologies,new materials,LED lighting is an inevitable trend.Functional lighting and landscape lighting control switch lights on,from the past to transform and upgrade the distribution o'clock remote control mode intelligent control method,a mobile terminal either on a computer control center,or in any corner of the world,As long as there is a network,you can achieve road lighting system remote control,telemetry,remote,that the typical application examples of what we call the "three remote" system.This paper analyzes the shortcomings of Neijiang existing street lighting control system,in order to improve the shortcomings of the original system combined with LED new materials,new technology trends in the application of technological innovation in the face,made targeted improvement program of the present system program was implemented.Firstly,the technical foundation to achieve lights three remote control systems need to be addressed,addresses these key technologies in the system application,to establish a network model of the system;secondly,analyzes the specific needs of street light three remote control system,the original system aspects of deficiencies,the overall architecture of the new LED technology gave birth control innovation,system design,application requirements for the system,hardware platform requirements,and energy-saving control strategy was planned;again,the system hardware and software design and implementation were described in detail,introduces the principle of hardware,software,processes and functional module design,which is the most important part of this article;Finally,to complete the set up of test environment,test the system in a given function,performance As a result,three remote control system and the present summary and follow-up prospects.The proposed street light control system consists of three remote control center platform software running on the server of monitoring center,located roadside subnet coordinator and located within the housing of the single street lamp control section three nodes.Control Center software platform is mainly responsible for building control network relationships and manage the entire system,displays real-time status information on lights and control commands can be issued,play a coordinating role in the operation of the entire street lighting system;subnet coordinator is responsible for it the jurisdiction of a single lamp control various interactive control instructions and work status data between nodes with a central server,while their work status and reporting server detection parameters;single lamp control node is responsible for receiving and responding to each street subnet coordinator kinds of control signals to LED lights were turned off and dimming,while collecting detection state parameters LED lights work submitted to the subnet coordinator.Implementation of this system,street lighting system can achieve low-cost,high-performance,fully automated control and management,Neijiang City one million people to travel at night security escort.