Research On Monitoring And Management System Constructing Of The TDJ The TDJ Retarder

Railway transport plays an important role in the national economy,in which freight transport is more like the economic artery as the whole radiation in China,with the carrying capacity,transport speed,low transport costs,safety performance,by other factors affect the characteristics of small.In the whole freight system,the marshalling station as the hub of the economic artery plays the role of cargo train disintegration and marshalling.The TDJ Retarder equipment is widely used in domestic and international production of a speed control equipment.It can control the speed of the vehicle according to the different factors such as the carriage of the train,the anti-pull,the vehicle weight,the vehicle speed and the environment,so that the train can be safely connected in the designated work area,while ensuring the safety of the staff Greatly improve the efficiency of the operation of the marshalling field,can produce direct economic and social benefits.The application of the reducer is more harsh,the use of high frequency,the daily maintenance and maintenance of a higher demand,maintenance and maintenance of the work is not in place the formation of equipment failure or failure,the light caused the vehicle damage or damage to the goods,Heavy may cause serious vehicle offsets and other accidents.This thesis starts from the root of the problem,and studies the construction method of the monitoring information management system of the equipment.First of all,it introduces the research background and purpose of the study,clarifies the research content of this thesis,chooses the appropriate research method,and studies the relevant literature and research at home and abroad,and forms a comprehensivecomparison.On the basis of the basic theory,The characteristics of the study.Secondly,it analyzes the problems existing in the actual use of the equipment,and the harm and safety hazards.The reasons for the formation of the problem are discussed in many ways,and a feasible solution is put forward.Thirdly,taking the actual application requirements of the site as the design principle,the demand analysis of the content of this thesis is carried out,and the theory of information management is introduced to construct the system.Through the use of PRO /Engineer parametric three-dimensional modeling technology on the reducer has a new development and design,so that it can meet the system requirements.And uses the wireless sensor network(WSN)based on Zig Bee technology to form the lower computer system.Host computer system in the framework of the.NET Framework,based on Winform technology development.Finally,this thesis elaborates the operation and maintenance of the system,and summarizes the research work of this thesis.Based on the actual demand of the field,combined with the theoretical knowledge of information management,this thesis constructs the monitoring and management information system of the equipment,and realizes the informationization of the equipment of the equipment,and solves the problems in the use of the equipment,Hidden dangers,for the use of field equipment has important guiding significance.At the same time,at the end of this thesis,it points out the shortcomings of the present situation and puts forward the research direction and focus of the next step.