Research On Remote Control System For Pumping Station

With the development of modern science and technology and the improvement of people's quality of life,the requirement of industrial production and people's life to water quality is higher and higher.However,the shortage of water resources and the continuous deterioration of the water environment,so that the role of pumping station is becoming more and more obvious.At present,the domestic pumping station control system does not have the ability to coordinate the allocation of water resources in different regions,it is not only low efficiency and energy consumption,but also can not fully play its role.Especially in the event of unexpected events can not effectively coordinate the allocation of resources.This paper puts forward the integration of network communication technology into the traditional control system of pumping station,and realizes the remote control of the pump station.The system can realize the coordination control of pumping station,local automatic control,remote control,local manual control and so on.Based on the remote control system,in order to adapt to the network environment under different conditions,and to adapt to the different control functions,starting from the structure of the remote control system of pumping station,respectively expounds four pumping station operation mode;then illustrates the pumping station remote control prone network delay and data loss problems.To explore the solution to the problem,and use the method of AR modeling and experimental testing to solve the network delay problem;finally,through the design of remote control system to realize the control process for the pumping station,pumping station remote control system is proposed in this paper,analysis of the composition of the system execution terminal and remote client and server,and through the simulation experiment the remote control system of the pumping station is technically feasible.