Korshinskii Cutting Machine Tool Motion Analysis Based On MATLAB Simulation

Software based on MATLAB Simulink module and SimMechanics module, cutting force of caragana korshinskii machine carries on the analysis and simulation of kinematical characteristics of a cutting tool.Korshinskii cutting force measuring machine adopted by the organization should not only converts the rotary motion of the motor to the reciprocating movement of the cutting tool, and must meet the tool in the process of cutting korshinskii keep constant motion, to reduce the dynamic error of the sensor.In this paper, the research and analysis of caragana korshinskii cutting force measuring machine transmission mechanism is a made up by double crank double slider mechanism of composite structure;Below according to the research on the kinematics characteristic of this institution, according to a set of initial length and initial phase Angle data, Simulink system analysis model is established and SimMechanics system simulation model, and then adjust the initial data and initial phase Angle, in order to obtain satisfied korshinskii cutting force measuring mechanism of cutting tool in cutting stroke keeps uniform requires a set of data, and obtained the displacement, velocity and acceleration curve of the tool motion, also received under SimMechanics module of mechanism motion simulation animation.