Research On Design Of Complex Joint’s Reinforcing Steel Bar Configuration And Construction Simulation

Both in terms of construction and design,there are still many problems in complex arrangement of dense node reinforced dense and complex structures. However in the design and construction, the core zone of the joint which play a role in the relay and the connection are of particular concern to site.This article will analysis on typical problems of complex dense nodes classification, and summed up to the technical measures to solve the problem.Now, the building information model(BIM) as a kind of brand-new concept modeling and 3D technology has become a necessary technical personnel at home and abroad were reviewed and the three dimensional simulation analysis technology. However the BIM technology application in complex dense node three-dimensional arrangement of reinforcement design and construction simulation studies are rare.This paper will be combined with the technical measures summed up and applicate the 3D design software simulate three-dimensional and construction simulation for complex node reinforcement arrangement, to solve the problems in design and construction. Finally to deepen the design software for secondary development, gives the software more practical function.The main contents are as follows:First of all, for reinforced concrete beam-column joints, the reinforced concrete beam, steel reinforced concrete column and steel reinforced concrete beam, steel reinforced concrete column nodes dense nodes three kinds of complex problems existing in the design and construction of on-site investigation,and summarize the typical node from the particular to the general summary.Through both quantitative and qualitative analysis, and then summed to get a problem solved the problem of technical measures;Then, respectively using the three-dimensional arrangement of detailed design Tekla Structure and construction deepen simulation software Navisworks, and summarized the use of technical measures to solve the problem before the typical node deepening problems of design, in order to address the presence of the design and construction site issue;Finally, according to the construction simulation of deepen design software Navisworks,using CSharp(C#) language.In the Visual Studio2010 development platform,do a two time development, the preparation of.NET plugin, and test the plug-in function, to give a more practical function of Navisworks software.