Five-axis Cnc Machine Tools Simulator System Development

At present the de mand for talent of the fi ve-axis CNC machine ope rator has gradually increased in today’s society, talents in short supply. The majority of CNC machine operator does not use a virtual m achining software sim ulation of the m achining program, or learning simulation software application wi ll take up a lot of tim e, if there is one and the same physical machine operation axis NC machine simulation training machine, you can save a lot of learning time, and very convenient to sim ulate the m achining program. Five-axis CNC machine tools mainly rely on im ports, expensive, ordinary universit ies, colleges and vocatio nal training institutions are difficult to have enough m oney to purchase a large number of m achines set up laboratories. The five-axis CNC m achine simulation training machine on the m arket just software, learners just use the mouse and keyboard to simulate the operation, there is no intuitive feel, resulting in a huge gap between the real machine learning. Based on this situation, five axis CNC machine tool simulation training system, a good com bination of CNC softwa re popular, and with the real operation of the machine, can solve the contradiction, has great market value.We designed and developed the mechanical structure axis CNC machine simulation training machines, keyboards, hand wheels, and com plete the assembly. Based on C # build m achine control and the User Interface, and com plete debugging on the axis CNC m achine simulation training machine, and use it to complete the impeller axis machining simulation. R & D axis CNC machine simulation training machine are:(1) Describing the basic principles of linear al gebra exercise must use the analys is were exemplified in three co nstitute a v ery common form of five-ax is CNC m achine tools under certain restrictions motion analysis algorithm.(2) Describing the basic principles of linear al gebra exercise must use the analys is were exemplified in three co nstitute a v ery common form of five-ax is CNC m achine tools under certain restrictions motion analysis algorithm.(3) Combination of the parameters of the five-axis and spindle m achine model to control instructions for the hardware keyboard and hand wheel m achine monitoring, real-time response to key operation, m achine tool operations acc ordingly with the appropriate campaign and displayed on the operating panel the respective interface.(4) Drawing machine model according to the ac tual proportion, will define the param eters of each axis m achine. According to the actual p roportion of developed hardware keyboard an d hand wheel m achine. Complete the whole sy stem debugging, using the keyboard and hand finished the processing code into the impeller and virtual machining.