Research On The Structure Design Method Of The Shoulders Of The Shoulders

Refers to the shoulders, shoulders, also known as taijian.The cuff sleeves in the shoulder shrug position with the sleeve type, also known as the shoulder sleeve. A combination of a shrug and a sleeve with a shoulder position with a shrug of the shoulders. In the 1980 s thick jackets with the shoulder pads are all the rage, the structure design method is the elevation and widened clothes shoulder line, sleeves for circular cut sleeve structure. 20 years later, the 80’s in the last century,wide shoulder styling again popular, but not as long as the 80’s,and thick, and lies in the length of the highlights. Due to the development of the times, different shoulder sleeve shapes can be formed on the basis of structural changes, forming a new structural modeling.Through analyzing the differences between the fit sleeve and the sleeve of the shoulders, the common ground between the two is that the body structure of the two is the body structure of the two. The sleeve of the fitting sleeve is close to the body of the upper arm of the human body, and the sleeve of the shoulders is a three-dimensional geometry. The focus of thestructure design is to create the three-dimensional structure of the sleeve. Therefore, this article based on to using the principle of geometric form in the assembly sleeve structure design principle based on the analysis of different shrug of his shoulders fitted sleeve cuff feature modeling, from shrug fitted sleeves front, back, side, looking down at the angle on the each side of the parts of the form of cuff, with simple geometry summarized the structure, each surface of the geometric shape combined into a three-dimensional geometric shape, good shape adjusted expansion for two-dimensional plane geometry graphics, different research shrug height shrug fit sleeve structure design method, and then make a like clothing and inspection of sample garment appearance. Through the analysis of the three pieces of the shoulders of the shoulders of the effect of the sleeve to meet the requirements of the shape.Therefore, it can be concluded that the use of this method can be used to create a different kind of shoulders and shoulders of a high degree of shape, and the effect is better. In order to better the test method of application, this method was used in charge type, folding pleat type and line segmentation type shrug fitted sleeve structure design, and create the kind of clothing and verification vests appearance effect. Through theanalysis of the four pieces of the shoulders of the shoulders of the model of the appearance of the effect of the model has reached the requirements of the shape, and the effect is better.Through the analysis, we can draw a conclusion that the geometrical theory can better understand the three-dimensional and complex structure of the shoulders, can be used to analyze the complex curved surface with the principle of easy understanding, and can change the basis of the method to more shrug fit sleeve structure. In order to provide a reference for the structure design and classroom teaching of the research and the teaching of the shoulders, it can provide a reference for the structure design of the new model.