Designing An Environmentally Friendly Sheep Head Hair Burning Structure

With the development of economy and increasing the level of consumption, made of sheep head food has become the indispensable food in our dining table.In addition to the dining room, dining room besides monopoly sales sheepshead special shops and food market is increasing.At the same time, to deal with fine wool sheep head need to increase more and more.Formed to appear, therefore, more effective, more advanced processing sheep head hair technology condition.The existing methods of processing sheep head hair singeing:(1) in the fire(2) using a blowtorch, hair spray gun to fire(3) with a red-hot iron plate to flipping(4) with asphalt, rosin to defeathering(5) with sodium hydroxide, lime and bubble, etc.Before the three methods applied the most extensive, but slow singeing, cannot satisfy the mass processing requirements.At the back of the two methods are used chemicals to realize the sheep head processing, the method of processing speed, bring many convenient handling of large quantity, but the harm to human health.In this paper to deal with a sheep head hair research as the background, to design a environmental protection automatic singeing machine.First of all, the market investigation method is used for a lot of research work, and get the sheep head shape characteristic of the basic data.Then this data are classified and analysis, and put forward the basic train of thought of design scheme, and the whole design process is divided into three parts: the design of the transmission structure, the structural design of the combustion and the structural design of the environmental protection.Depending on the complexity of the sheep head shape and the actual data, the transmission structure and burning structure respectively puts forward three kinds of design scheme, and has carried on the contrast analysis, choose the most appropriate design.Second, find out the sheep head during singeing process which factors impact on the environment is the largest, put forward the design of the structure of an environmental case first, and then according to the requirements of the design technology, for the entire structure of green sheep head singeing machine using UG/NX7.0 3 d design software to establish three-dimensional model of every parts and components, and 3 d assembling combination.Finally, the design calculation of execution component and select reasonable prime mover, completed the whole design process.Design of singeing machine is very suitable for mass processing of sheepshead occasions, each processing need only 12 seconds.The device is equipped with environmental protection structure, no obvious pollution to the environment.In this paper the implementation of the side can bring convenience to people on the other side to prevent some illegal food processing behavior can help to people’s physical health.