Research And Application Of The Prefabricate Assembly Integral Frame Resident Structure

Prefabricate assembly integral structure is the only road to achieve housingindustrialization, this kind of structure has high construction speed, saving resources,reduce waste, less pollution, optimize the distribution of social resources, etc. Thispaper according to the prefabricate assembly integral frame structure, summarizes itsconstruction technology methods, studied the overall structure design and calculationmethod, to analysis and comparison combine with the basic technique of separationearthquake, and puts forward related the structure performance of improvementmeasures. The concrete content includes the following aspects:(1) Summarizes the prefabricate assembly integral structure experimental studyhave done by Guangzhou university, include the mechanical behavior andconstruction technology of composite slab, composite beam, beam and slab joint,beam and column joint, main beam and secondary beam joint.(2) study the design calculation theory and method for the column, beam andslab of the prefabricate assembly integral structure main force component, andorganize the construction technology and the assembly technology for the prefabricateassembly integral structure(3) Proposed to the analysis methods for the prefabricate assembly integralstructure to overall design and calculation, using the finite element analysis software,to conduct the finite element simulation analysis for the now-poured structural whichbased on the same cross section size, and then to take the construction stage checkingcalculation for the prefabricate assembly integral structure, achieve the two stageanalysis and calculation. And combining with the prefabricate assembly integralstructure engineering design examples, the simulation analysis using MIDAS/GEN,describes the two stages of the design analysis process.(4) Conclude the basic technique of separation earthquake theory, Proposed tothe importance of the basic technique of separation earthquake using into the prefabricate assembly integral structure, combining with the design example, usingMIDAS/GEN to simulation analysis the basic technique of separation earthquake, andcompares them with the non-Seismic Isolation model, verify the basic technique ofseparation earthquake can improve the prefabricate assembly integral structureseismic performance...