The Design And Implementation Of Distributed Base Station Equipment Simulation System

Currently, while the material standard of living is constantly improved, peoplebegin to pursue the non-material aspects. The speech business of the mobile serviceincreases sharply as well. In such an environment, the appearance of the smartphonesystem like ios, android and so on, pushes forward the demand for high-speed dataservice.In response to the pressure of the growing data service, operators start to searchthe entirely new network deployment scenarios. From the development of the industry,distributed base station system apparently is the most representative one of the next basestation. Compare to the traditional deployment method of acer station, distributed basestation system effectively solves the problems caused by multi-feed antenna, and itimmensely lowers complexity of base station deployment. At the same time, it isprovided with many advantages such as low cost, strong adaptability, convenientconstruction and so on.For the purpose of adapting to the new market demand, operators encounter manydifficulties which they’ve never faced when they make the deployment of distributedbase station. As a result, the progress of distributed base station deployment is greatlyslowed down. Based on the above and combined with practical work, I propose toexploit a set of simulation system which assists to construct distributed base station.This system simulates the failures that may occur when the base station is running, andconsiders the self-cure algorithm after base station failure.The main content of the paper are as follows:1) Analyze and discuss the development and current situation of distributed basestation.2) Discuss the theoretical basis of the subject, and select the most advancedsimulation technology and theory. Afterwards, analyze architecture of thesubject, which paves the way for follow-up needs analysis and system design.3) Combined with the actual situation, I complete the analysis work of simulationsystem for distributed base station equipment, which includes functionalrequirements analysis, performance requirements analysis, etc. Then I work out the analysis and design of architecture for this project.4) Implement different module for the system which is based on analysis anddesign of the pre-system.5) Test run the completed system that installed on test server equipment and formtest report and conclusion.I hope through this examination of simulation system for distributed base stationequipment, I can make some contribution to accelerate the promotion and application ofdistributed base station equipment.