Type ZK02Gear Measuring Instrument For Measuring And Controlling Software System Analysis And Design

The gear measuring machine is an inevitable machine used in producing gears manufacturers. That ensures the quality of gears.At present, with the development of science and manufacturing, high performance is required for all kinds of electromechanical product which includes high reliability, long life-span, stableness and low noise. Therefore, gear as a transmission part is required higher quality. At the same time the demand of gear measuring machine become increasing.This thesis designs a set of gear measuring machine contains measurement and control system which measures gears in accordance with ISO1328-1990s international gear precision standard.Anda also the test results are processed,which can provide the precision grade of gears.Measurement and control system of gear measuring machine mostly researching content includes:the establishment of coordinate before the gear measuring and the process of positioning, gear tooth profile and helix, the principle of pitch measurement, motion control,and deviation calculation.The system application software interface is based on windows XP platform developed using VC++6.0.Measurement and control system of ZK02gear measuring machine adopted in the equipment verification, complete gear automatic measurement function. The system design made the measurement simplifying processing and efficiency, model measured data comply with the design requirements.Measurement and control software system of ZK02gear measuring machine has been applied on the gear measurement.The whole principle of instruments and software and hardware interfaces, the system requirements of measuring instruments, analysis and design, system interface to display. Completed gear tooth profile and helix, the principle of pitch measurement.