Software Analysis And Design Of Lighting Monitor System For Vocational Colleges

China to vigorously develop vocational education, as well as various vocational colleges are active in the construction of school buildings in the lighting system is the main infrastructure. Traditional lighting systems to hand control, light control, clock control for the main mode, generally, rely on mechanical switches to decentralized control. Staff necessary to the scene in order to operate the lighting.lt is not only impossible to achieve remote control, but also lighting data can not be timely acquisition. Traditional lighting systems, the degree of integrated management, will result in different levels of energy waste in the holidays and at night no one state, does not meet the countries energy saving ideas. Here, the actual situation for the Al area of Yibin Vocational and Technical College to develop a lighting control system for remote control of the school district.The buildings are concentrated, the radius of the distance between buildings in the1200m the scope of class. Therefore, the control network can use the RS-485bus architecture, and wired technology in the technical maturity and stability of the system are superior than wireless technology. On this basis, we can design a simple, stable and practical remote lighting control system.The integrated use of ADAM-4250, ADAM-4017, ADAM-4050and other I/O communication module, RS-485network communications technology, Visual C programming language and Access database technologies. Lighting group remote switch monitoring, voltage value, current value of real-time acquisition are implemented. Monitoring center through user-friendly interface design allows clear view of the use of lanterns in the school district, and remote control. Control the lighting of the teaching area in the evenings, and holidays. Achieve energy saving, centralized management purposes.This thesis is completed the system requirements analysis, overall design, and its communications network, to develop the appropriate monitoring software. After the simulation test results show that:The system implements the campus lighting system, networking, and information management. Reduce the cost of the campus lighting management and the workload of managers.