Optimization Design Of Automatic Feed Mechanism OfΦ610 Automatic Steel Pipe End-facing Chamfering Machine

Pipe end-facing chamfering machine is a steel processing equipment, which used to carry outchamfering pipe end-face, the equipment consists of a floating cutter、automatic feedingmechanism. The current tasks mainly about automatic feeding mechanism, the research-basedinstitutions, mainly related to the contents of virtual prototyping, finite element analysis,structural optimization, organization optimization, mechanical manufacturing processes.This article focuses on theΦ610 pipe chamfering machine automatic feed mechanism designand optimization,which include following contents: Determine a reasonable form to the automaticfeed mechanism ; Run dynamic simulation analysis based on MSC.ADAMS to identify the bestworking position.; RUN structural analysis by ANSYS software,to acquire the stress state, andrun optimization;The final optimization results are: The Maximum propulsion and propulsion were reduced byan average of 17.6% and 10.2%; The Maximum lifting force and Average lifting force werereduced by 21.1% and 24.2%, and the force is more stable. Arm weight reduced by 54.58%,Bearing body weight reduced by 41.7%.Compared the results of optimization with before,it can conclude:1,The force is more reasonable and beneficial to the improvement of institutional life;2,.The weight is more lightning, which saves material obviously;3,.Greatly saving energy;4,.Fulfill The design in theory from the experience design.