Asphalt Mixing Energy-efficient Building Design And Product Delivery System Of Material

With the rapid development of industrialization, energy waste has caused widespread concern around the world. Coupled with energy shortages and rising oil prices, it has become the main concern for researchers in the field. In engineering machinery, the asphalt mixing plant which occupies the largest section in the road machinery market constitutes a major source for energy waste. Given the indispensible status of the asphalt mixing plant in road construction equipment, it is necessary to investigate the energy saving strategies for the asphalt mixing equipment.The present research is based on the J4000-type container type asphalt mixing plant exploring the feasible methods for system potential energy saving as well as system kinetic energy saving. is based on the asphalt mixing plant finished materials enhance the body the energy consumption and power analysis and study, proposed to increase the weight the body of the method In effort to reduce the agency and the energy input power into full play in order to achieve energy saving.First, a feasibility analysis of weight saving, the analysis showed that the weight saving is entirely feasible. Second, by listing a variety of weight saving program, analyze the advantages and disadvantages, and finally to determine the final weight saving program.In order to achieve the best energy-saving effect, the paper finally adopted hydraulic mechanical weight and weight of the effective combination of methods, through the moving pulley blocks, wire rope connected at one end with the hopper, the other end and connected with weights. Moving pulley rope length can solve the problem. Weight block made of hydraulic lift in the form, so you can avoid injuries to personnel due to wire fracture of the phenomenon. To take advantage of no-load potential energy contained in the hopper drops, to install a power generation sector hopper when the hopper falls, potential energy is converted to electrical energy, electrical energy is converted to another institution by converting the hydraulic energy stored in the accumulator. Accumulator can provide some of the energy to weight bracket。In order to avoid runaway accident, or to production needs, should be placed in a position hopper can be resolved by increasing the car stop the problem。The car stop is an automatic locking device, is normally open state. When sensors on the car stop to the hopper of electromagnetic induction sensors, then the rod automatic recovery. The car stop there manual function.。To test whether the design meets the requirements in the ADAMS simulation software, with emphasis on energy efficiency for the simulation and analysis. The simulation analysis can be drawn, the weight saving can be very good to save energy.Increase in body weight based on the design used successfully in production, will greatly enhance the performance of mixing equipment can be widely extended to the elevators, cranes, lifts, cranes and other machines. Therefore, the subject of a wide range of applications.