Preparation And Properties Of Ultra-Thin Films Of Inorganic Carbon Material Modification

PE is one of the largest production of plastic film, which has good processing properties, heat aging resistance, low temperature resistance, chemical stability of many excellent features. A review on the fabrication of three new composite films, which are prepared by adding GO and MWCNT into PE, is given in this article. The new composite films of GO/PE, MWCNT/PE, GO-MWCNT/PE are successfully got. here. This paper mainly explores the making of these three new composite film of optimum conditions. After mixing both PE and GO MWCNT together, the mechanical properties of the composite improve clearly. This may be due to a certain extent between the three pairwise interactions that improved the properties of the new materials. The thermal adhesive and low temperature heat sealing type of the normal PE is good, so they are used as an adhesive layer and a heat-sealable composite film layer. But because of its poor heat resistance, it is not suitable for retort pouch sealing layer. The melting point of the new materials in this paper is higher than the normal PE, so it can be used in the widely aeras. Though the melting point of the new materials are not improved clearly, the method of producing the higher melting point materials is provided. In addition, by pulling films to gate PE, MWCNT or GO-MWCNT composites is reported in this paper first. It is filled the blank of this area.